환영 고객!

회원

도움말

유적(베이징)과학기술유한공사
주문 제조자

주요 제품:

ybzhan>제품
제품 카테고리

유적(베이징)과학기술유한공사

  • 이메일

    sales@uhightech.com

  • 전화

  • 주소

    ??? ??? ????? 186?

지금 연락

선형 및 비선형 펄스 전송 소프트웨어 Fiberdesk

협상 가능업데이트12/10
모델
제조업체의 성격
생산자
제품 카테고리
원산지 Place of Origin

개요

소개 비선형 펄스 전송이 쉬워졌습니다 Fiberdesk는 선형 및 비선형 펄스 전송을 위한 소프트웨어입니다

제품 정보

소개

비선형 펄스 전송이 쉬워졌습니다

Fiberdesk는 선형 및 비선형 펄스 전송을 위한 소프트웨어입니다.이는 단계별 부립엽 변환 방법을 통해 확장된 비선형 설정론 방정식을 구하고 이를 속도 방정식 시뮬레이션과 결합시킬 수 있다.

각각Fiberdesk 소프트웨어라이센스는 모두 하드웨어 암호화 개로 보호됩니다.컴퓨터의 로컬 구동되지 않는 USB 키로 주문할 수 있으며 Fiberdesk 소프트웨어를 실행할 때 컴퓨터에 삽입된 상태를 유지해야 합니다.

线性和非线性脉冲传输软件Fiberdesk
Fiberdesk 소프트웨어 인터페이스 1
线性和非线性脉冲传输软件Fiberdesk
Fiberdesk 소프트웨어 인터페이스 2
线性和非线性脉冲传输软件Fiberdesk
Fiberdesk 소프트웨어 인터페이스 3

Fiberdesk 다운로드

최신 업데이트: 2022년 9월 20일

Fiberdesk 암호화 개를 삽입합니다.최신 패키지를 다운로드하고 실행 파일을 간단히 실행합니다.

Fiberdesk 다운로드 링크

최신 패키지에는 64비트 버전이 포함됩니다.

– Fiberdesk 버전 7.0

- 사용자 정의와 같은 Fiberdesk 파일에 대한 python 판독기

– 기능 목록

线性和非线性脉冲传输软件Fiberdesk
线性和非线性脉冲传输软件Fiberdesk

게시된 문서(문서에서 Fiberdesk 소프트웨어를 사용하여 시뮬레이션)

[81] Bao, Y., Dai, L., Jiang, J., Huang, Z., Huang, Q., Rozhin, A., Mou, C., Humidity Resistant Carbon Nanotubes-Styrene Methyl-Methacrylate Polymer Composite for Ultrafast Laser. Adv. Optical Mater. 2022, 2200461.

[80] William Renard, Clément Chan, Antoine Dubrouil, Jérôme Lhermite, Giorgio Santarelli and Romain Royon, “Agile femtosecond synchronizable laser source from a gated CW laser,” Laser Phys. Lett. 19, 075105, (2022).

[79] Atsushi Ishizawa, Kota Kawashima, Rai Kou, Xuejun Xu, Tai Tsuchizawa, Takuma Aihara, Koki Yoshida, Tadashi Nishikawa, Kenichi Hitachi, Guangwei Cong, Noritsugu Yamamoto, Koji Yamada, and Katsuya Oguri, “Direct f-3f self-referencing using an integrated silicon-nitride waveguide,” Opt. Express 30, 5265-5273 (2022).

[78] D. Marion, G. Duchateau, and J.-C. Delagnes, “Control of nonlinear processes using versatile random photonic sources: Application to the energy deposition in a dielectric material,” Phys. Rev. A 105, 013525 (2022).

[77] Yu Zhang, Yaoyao Qi, Song Yang, Nannan Luan, Zhenxu Bai, Jie Ding, Yulei Wang, Zhiwei Lu,
High pulse energy, narrow-linewidth all-fiber 1064 nm picosecond master oscillator power amplifier system, Optics & Laser Technology, Volume 147, p.107636 (2022).

[76] Xuzhuo Jia, Yuanqi Song, Li Yan, Qimeng Lin, Lei Hou, Xiaoqiang Feng and Jintao Bai, “Yb-doped polarization-maintaining femtosecond fiber laser using Gires–Tournois interferometers for dispersion management,” Appl. Phys. Express 14 112007 (2021).​

[75] Victor Distler, Friedrich Möller, Benjamin Yildiz, Marco Plötner, César Jauregui, Till Walbaum, and Thomas Schreiber, “Experimental analysis of Raman-induced transverse mode instability in a core-pumped Raman fiber amplifier,” Opt. Express 29, 16175-16181 (2021).

[74] Y. W. Lee, J. Y. Chuang, C. C. Lin, M. C. Paul, S. Das, and A Dhar, “High-efficiency picosecond mode-locked laser using a thulium-doped nanoengineered yttrium-alumina-silica fiber as the gain medium,” Opt. Express 29, 14682-14693 (2021).

[73] Lee, YW., Chen, CM., Chuang, WH. et al. Highly efficient mode-locked and Q-switched Er3+-doped fiber lasers using a gold nanorod saturable absorber. Sci Rep 11, 20079 (2021).

[72] Pia Fuertjes, Lorenz von Grafenstein, Dennis Ueberschaer, Chao Mei, Uwe Griebner, and Thomas Elsaesser, “Compact OPCPA system seeded by a Cr:ZnS laser for generating tunable femtosecond pulses in the MWIR,” Opt. Lett. 46, 1704-1707 (2021).

[71] Paul Repgen, Generation of High-Energy Pulses by Managing the Kerr-Nonlinearity in Fiber-Based Laser Amplifiers, Dissertation (2021).

[70] T. Zhou, Q. Du, D. Li, E. Esarey, C. Schroeder, C. Geddes, and R. Wilcox, “Distributed Spectral Filtering for Ultrafast Fiber Lasers,” in Laser Congress 2020 (ASSL, LAC), P. Schunemann, C. Saraceno, S. Mirov, S. Taccheo, J. Nilsson, A. Petersen, D. Mordaunt, and J. Trbola, eds., OSA Technical Digest (Optical Society of America, 2020), paper JTu5A.11.

[69] Rezki Becheker, Mohamed Touil, Saïd Idlahcen, Mincheng Tang, Adil Haboucha, Benoit Barviau, Frédéric Grisch, Patrice Camy, Thomas Godin, and Ammar Hideur, “High-energy normal-dispersion fiber optical parametric chirped-pulse oscillator,” Opt. Lett. 45, 6398-6401 (2020)

[68] Zhang, Z., Han, H., Tian, W. et al. A fully stabilized low-phase-noise Kerr-lens mode-locked Yb:CYA laser frequency comb with an average power of 1.5 W. Appl. Phys. B 126, 134 (2020).

[67] Victor Distler, Friedrich Möller, Maximilian Strecker, Gonzalo Palma-Vega, Till Walbaum, and Thomas Schreiber, “Transverse mode instability in a passive fiber induced by stimulated Raman scattering,” Opt. Express 28, 22819-22828 (2020)

[66] Oliver de Vries, Marco Plötner, Florian Christaller, Hao Zhang, Annika Belz, Benjamin Heinrich, Harald Kübler, Robert Löw, Tilman Pfau, Till Walbaum, Thomas Schreiber, and Andreas Tünnermann, “Highly customized 1010 nm, ns-pulsed Yb-doped fiber amplifier as a key tool for on-demand single-photon generation,” Opt. Express 28, 17362-17373 (2020)

[65] Paul Repgen, Benedikt Schuhbauer, Moritz Hinkelmann, Dieter Wandt, Andreas Wienke, Uwe Morgner, Jörg Neumann, and Dietmar Kracht, “Mode-locked pulses from a Thulium-doped fiber Mamyshev oscillator,” Opt. Express 28, 13837-13844 (2020)

[64] Craig Ingram, Huy Tuong Cao, Sebastian Ng, Daniel D. Brown, David Ottaway, Peter Veitch, Adam Gambell, Nikita Simakov, Alexander Hemming, “High precision measurement of optical absorption in low-OH fused silica at 2 micron,” Proc. SPIE 11200, AOS Australian Conference on Optical Fibre Technology (ACOFT) and Australian Conference on Optics, Lasers, and Spectroscopy (ACOLS) 2019, 1120031 (30 December 2019)

[63] O. de Vries, M. Plötner, T. Schreiber, R. Eberhardt, A. Tünnermann, „Fiber lasers: a power-scalable coherent light source for applications in space“,

[62] T. P. Butler, N. Lilienfein, J. Xu, N. Nagl, C. Hofer, D. Gerz, K. F. Mak, C. Gaida, T. Heuermann, M. Gebhardt, J. Limpert, F. Krausz and I. Pupeza, Multi-octave spanning, Watt-level ultrafast mid-infrared source, Journal of Physics: Photonics, Volume 1, Number 4 (2019)

[61] Yu Li, Longfei Wang, Meisong Liao, Long Zhang, Wanjun Bi, Tianfeng Xue, Yinyao Liu, Renli Zhang, Yasutake Ohishic, “Suspended-core fluoride fiber for broadband supercontinuum generation,” Optical Materials, Volume 96, October 2019, 109281

[60] Masaki Tokurakawa, Hiromu Sagara, and Henrik Tünnermann, “All-normal-dispersion nonlinear polarization rotation mode-locked Tm:ZBLAN fiber laser,” Opt. Express 27, 19530-19535 (2019).

[59] Nathalie Nagl, Ka Fai Mak, Qing Wang, Vladimir Pervak, Ferenc Krausz, and Oleg Pronin, “Efficient femtosecond mid-infrared generation based on a Cr:ZnS oscillator and step-index fluoride fibers,” Opt. Lett. 44, 2390-2393 (2019).

[58] S. Kuhn, S. Hein, C. Hupel, J. Nold, F. Stutzki, N. Haarlammert, T. Schreiber, R. Eberhardt, A. Tünnermann, “High-power fiber laser materials: influence of fabrication methods and codopants on optical properties,” Proc. SPIE 10914, Optical Components and Materials XVI, 1091405 (27 February 2019).

[57] Seidel, Marcus (2018): A new generation of high-power, waveform controlled, few-cycle light sources. Dissertation, LMU München: Fakultät für Physik

[56] Ruihong Dai, Yafei Meng, Yao Li, Jiarong Qin, Shining Zhu, and Fengqiu Wang, “Nanotube mode-locked, wavelength and pulsewidth tunable thulium fiber laser,” Opt. Express 27, 3518-3527 (2019).

[55] M. Seidel, X. Xiao and A. Hartung, “Solid-Core Fiber Spectral Broadening at Its Limits,” in IEEE Journal of Selected Topics in Quantum Electronics, vol. 24, no. 5, pp. 1-8, Sept.-Oct. 2018.

[54] Li, F., Yang, Z., Wang, Y., Lv, Z., Wei, Y., Wang, X., … & Zhao, W. (2018). Nonlinear compression of ultrashort-pulse laser to 36fs with 556MW peak power. IEEE Photonics Technology Letters.

[53] Yang, K., Zheng, S., Wu, Y., Ye, P., Huang, K., Hao, Q., & Zeng, H. (2018). Low-repetition-rate all-fiber integrated optical parametric oscillator for coherent anti-Stokes Raman spectroscopy. Optics Express, 26(13), 17519-17528.

[52] Tang, M., Becheker, R., Hanzard, P. H., Tyazhev, A., Oudar, J. L., Mussot, A., … & Hideur, A. (2018). Low Noise High-Energy Dissipative Soliton Erbium Fiber Laser for Fiber Optical Parametric Oscillator Pumping. Applied Sciences, 8(11), 2161.

[51] Becheker, R., Tang, M., Hanzard, P. H., Tyazhev, A., Mussot, A., Kudlinski, A., Hideur, A. “High-energy dissipative soliton-driven fiber optical parametric oscillator emitting at 1.7 µm.” Laser Physics Letters, 15(11), 115103 (2018).

[50] Delagnes, J. C., Royon, R., Lhermite, J., Santarelli, G., Muñoz, H., Grosz, T., Cormier, E. “High-power widely tunable ps source in the visible light based on four wave mixing in optimized photonic crystal fibers,” Opt. Expr. 26(9), 11265-11275 (2018).

[49] H. Sagara, A. Suzuki, S. KItajima, and M. Tokurakawa, “Two micron All-normal-dispersion NPR mode-locked Tm:ZBLAN fiber laser,” in Laser Congress 2018 (ASSL), OSA Technical Digest (Optical Society of America, 2018), paper ATu2A.25.

[48] Niu, F., Li, J., Yang, W., Zhang, Z., & Wang, A. “Fiber-Based High-Energy Femtosecond Pulses Tunable From 920 to 1030 nm for Two-Photon Microscopy,” IEEE Photonics Technology Letters, 30(16), 1479-1482 (2018).

[47] Zaharit Refaeli, Yariv Shamir, Atara Ofir, Gilad Marcus, “Nearly fully compressed 1053 nm pulses directly obtained from 800 nm laser-seeded photonic crystal fiber below zero dispersion point”, Proc. SPIE 10516, Nonlinear Frequency Generation and Conversion: Materials and Devices XVII, 1051607 (15 February 2018).

[46] Jinwei Zhang, Ka Fai Mak, Nathalie Nagl, Marcus Seidel, Dominik Bauer, Dirk Sutter, Vladimir Pervak, Ferenc Krausz & Oleg Pronin, “Multi-mW, few-cycle mid-infrared continuum spanning from 500 to 2250 cm−1”, Light: Science & Applications 7, 17180 (2018).

[45] O. de Vries, T. Schreiber, R. Eberhardt, A. Tünnermann, M. Windmüller, J. Riedel, M. Rößler, F. Kolb, “Design optimization of fiber amplifiers exposed to high gamma-radiation doses,” Proc. SPIE 10562, International Conference on Space Optics — ICSO 2016, 105620M (25 September 2017).

[44] Hao Luo, Li Zhan, Zhiqiang Wang, Liang Zhang, Cheng Feng, and Xuehao Shen, “All-Fiber Generation of Sub-30 fs Pulses at 1.3-μm via Cherenkov Radiation With Entire Dispersion Management,” J. Lightwave Technol. 35, 2325-2330 (2017)

[43] Joachim Buldt, Michael Müller, Robert Klas, Tino Eidam, Jens Limpert, and Andreas Tünnermann, “Temporal contrast enhancement of energetic laser pulses by filtered self-phase-modulation-broadened spectra,” Opt. Lett. 42, 3761-3764 (2017).

[42] Moritz Hinkelmann, Dieter Wandt, Uwe Morgner, Jörg Neumann, and Dietmar Kracht, “Mode-locked Ho-doped laser with subsequent diode-pumped amplifier in an all-fiber design operating at 2052 nm,” Opt. Express 25, 20522-20529 (2017).

[41] Marco Plötner, Victor Bock, Tim Schultze, Franz Beier, Thomas Schreiber, Ramona Eberhardt, and Andreas Tünnermann, “High power sub-ps pulse generation by compression of a frequency comb obtained by a nonlinear broadened two colored seed,” Opt. Express 25, 16476-16483 (2017).

[40] L. Lavenu, M. Natile, F. Guichard, Y. Zaouter, M. Hanna, E. Mottay, and P. Georges, “High-energy few-cycle Yb-doped fiber amplifier source based on a single nonlinear compression stage,” Opt. Express 25, 7530-7537 (2017).

[39] M. Gebhardt, C. Gaida, F. Stutzki, S. Hädrich, C. Jauregui, J. Limpert, and A. Tünnermann, “High average power nonlinear compression to 4  GW, sub-50  fs pulses at 2  μm wavelength,” Opt. Lett. 42, 747-750 (2017).

[38] Steffen Hädrich, Marco Kienel, Michael Müller, Arno Klenke, Jan Rothhardt, Robert Klas, Thomas Gottschall, Tino Eidam, András Drozdy, Péter Jójárt, Zoltán Várallyay, Eric Cormier, Károly Osvay, Andreas Tünnermann, and Jens Limpert, “Energetic sub-2-cycle laser with 216  W average power,” Opt. Lett. 41, 4332-4335 (2016).

[37] Martin Gebhardt, Christian Gaida, Fabian Stutzki, Steffen Hädrich, Cesar Jauregui, Jens Limpert, Andreas Tuennermann, “Self-compression to 24 MW peak power in a fused silica solid-core fiber using a high-repetition rate thulium-based fiber laser system,” Proc. SPIE 9728, Fiber Lasers XIII: Technology, Systems, and Applications, 97282H (March 11, 2016).

[36] D. Gaponov, L. Lavoute, S. Février, A. Hideur, N. Ducros, “2µm all-fiber dissipative soliton master oscillator power amplifier.” Proc. SPIE 9728, Fiber Lasers XIII: Technology, Systems, and Applications, 972834 (March 11, 2016).

[35] T. Gottschall, J. Limpert, and A. Tünnermann, “Widely tunable optical parametric oscillator based on four-wave mixing,” in Advanced Solid State Lasers, OSA Technical Digest (online) (Optical Society of America, 2015), paper ATu4A.9.

[34] C. Gaida, M. Gebhardt, F. Stutzki, C. Jauregui, J. Limpert, and A. Tünnermann, “Self-compression in a solid fiber to 24  MW peak power with few-cycle pulses at 2  μm wavelength,” Opt. Lett. 40, 5160-5163 (2015)

[33] D. A. Gaponov, R. Dauliat, D. Darwich, T. Mansuryan, R. Jamier, S. Grimm, K. Schuster, and P. Roy, “High-power passively mode-locked dissipative soliton fiber laser featuring cladding-pumped non-CVD thulium-doped fiber,” J. Opt. Soc. Am. B 32, 1656-1659 (2015)

[32] Thomas Gottschall, Tobias Meyer, Michael Schmitt, Jürgen Popp, Jens Limpert, and Andreas Tünnermann, “Four-wave-mixing-based optical parametric oscillator delivering energetic, tunable, chirped femtosecond pulses for non-linear biomedical applications,” Opt. Express 23, 23968-23977 (2015)

[31] M. Gebhardt, C. Gaida, S. Hädrich, F. Stutzki, C. Jauregui, J. Limpert, and A. Tünnermann, “Nonlinear compression of an ultrashort-pulse thulium-based fiber laser to sub-70  fs in Kagome photonic crystal fiber,” Opt. Lett. 40, 2770-2773 (2015)

[30] Martin Gebhardt, Christian Gaida, Fabian Stutzki, Steffen Hädrich, Cesar Jauregui, Jens Limpert, and Andreas Tünnermann, “Impact of atmospheric molecular absorption on the temporal and spatial evolution of ultra-short optical pulses,” Opt. Express 23, 13776-13787 (2015)

[29] M. Gebhardt, C. Gaida, F. Stutzki, C. Jauregui, J. Limpert, and A. Tünnermann, “Sub-200 fs, nJ-level stretched-pulse thulium-doped fiber oscillator at 23MHz repetition rate,” in Advanced Solid State Lasers, OSA Technical Digest (online) (Optical Society of America, 2014), paper AM5A.43.

[28] F. Beier, H.-J. Otto, C. Jauregui, O. de Vries, T. Schreiber, J. Limpert, R. Eberhardt, and A. Tünnermann, “1009  nm continuous-wave ytterbium-doped fiber amplifier emitting 146  W,” Opt. Lett. 39, 3725-3727 (2014)

[27] Tongxiao Jiang, Aimin Wang, Guizhong Wang, Wei Zhang, Fuzeng Niu, Chen Li, and Zhigang Zhang, “Tapered photonic crystal fiber for simplified Yb:fiber laser frequency comb with low pulse energy and robust fceo singals,” Opt. Express 22, 1835-1841 (2014).

[26] Niu, F., Jiang, T., Wang, A., Wang, G., Li, C., & Zhang, Z. (2014, July). Design and fabrication of tapered photonic crystal fiber for astro-combs applications. In Optical Fibre Technology, 2014 OptoElectronics and Communication Conference and Australian Conference on (pp. 709-711). IEEE.

[25] Niu, F., Jiang, T., Wang, G., Li, C., Wang, A., & Zhang, Z. (2014, June). Green-enhanced super-continuum generation in a tapered photonic crystal fiber for efficient ƒ ceo detection. In Lasers and Electro-Optics (CLEO), 2014 Conference on (pp. 1-2). IEEE.

[24] Jiang, T., Wang, G., Wang, A., Zhang, W., Niu, F., Li, C., & Zhang, Z. (2014, July). Tapered photonic crystal fiber for simplified 500MHz Yb: Fiber laser frequency comb with no amplifier. In Optical Fibre Technology, 2014 OptoElectronics and Communication Conference and Australian Conference on (pp. 120-122). IEEE.

[23] Haxsen, F., Wienke, A., Wandt, D., Neumann, J., & Kracht, D. (2014). Tm-doped mode-locked fiber lasers. Optical Fiber Technology, 20(6), 650-656.

[22] Chi, J., Li, P., Liang, B., Yao, Y., Hu, H., Zhang, G., … & Ma, C. (2014). 100-W 430-ps all-fiber picosecond laser by using 10-/130-μm ytterbium-doped double-clad fiber and its application in SCS. Applied Physics B, 1-9.

[21] R. A. Sims, P. Kadwani, H. Ebendorff-Heideprem, L. Shah, T. M. Monro, M. Richardson, “Chirped pulse amplification in single mode Tm:fiber using a chirped Bragg grating,” Applied Physics B, May 2013, Volume 111, Issue 2, pp 299-304

[20] Tongxiao Jiang, Guizhong Wang, Wei Zhang, Chen Li, Aimin Wang, and Zhigang Zhang, “Octave-spanning spectrum generation in tapered silica photonic crystal fiber by Yb:fiber ring laser above 500 MHz,” Opt. Lett. 38, 443-445 (2013).

[19] J. Lecourt, S. Boivinet, and Y. Hernandez, “All-normal dispersion, all-fibered, PM mode-locked laser and its modeling,” in International Photonics and Optoelectronics Meetings, OSA Technical Digest (online) (Optical Society of America, 2012), paper STh4A.03.

[18] Terniche, S., et al. “ETUDE DE LA PROPAGATION D’UNE IMPULSION COURTE EN CAVITE LASER AVEC UN LOGICIEL DE SIMULATION NUMERIQUE.” Journal of Fundamental and Applied Sciences 4.1 (2012): 66-73.

[17] Anthony Bertrand ; Flavien Liégeois ; Yves Hernandez and Domenico Giannone “Efficient high-power narrow-linewidth all-fibred linearly polarized ytterbium laser source”, Proc. SPIE 8433, Laser Sources and Applications, 84330F (June 1, 2012).

[16] Masayuki Suzuki, Motoyoshi Baba, Shin Yoneya and Hiroto Kuroda, Efficient spectral broadening of supercontinuum in photonic crystal fiber with self-phase modulation induced by femtosecond laser pulse, Appl. Phys. Lett. 101, 191110 (2012).

[15] J. Lhermite, C. Lecaplain, G. Machinet, R. Royon, A. Hideur, and E. Cormier, “Mode-locked 0.5 μJ fiber laser at 976 nm,” Opt. Lett. 36, 3819-3821 (2011)

[14] Frithjof Haxsen, Dieter Wandt, Uwe Morgner, Joerg Neumann, and Dietmar Kracht, “Pulse characteristics of a passively mode-locked thulium fiber laser with positive and negative cavity dispersion,” Opt. Express 18, 18981-18988 (2010)

[13] Michael Mielke, David Gaudiosi, Kyungbum Kim, Tolga Yilmaz, Michael Greenberg, Sha Tong, Xinhua Gu, Mark Geusen, Robert Cline, Mark Slovick, Neill Allen, Michael Manning, Barry Schuler and Steven Sapers, “Pulse and Amplifier Dynamics in High Energy Fiber Optic Ultrashort Pulse Laser Systems,” Proc. SPIE Vol. 7214 (Feb. 6, 2009).

[12] S. Hädrich, J. Rothhardt, F. Röser, T. Gottschall, J. Limpert, and A. Tünnermann, “Degenerate optical parametric amplifier delivering sub 30 fs pulses with 2GW peak power,” Opt. Express 16, 19812-19820 (2008)

[11] T. Eidam, F. Röser, O. Schmidt, J. Limpert and A. Tünnermann, “57 W, 27 fs pulses from a fiber laser system using nonlinear compression,” Applied Physics B: Lasers and Optics, Vol. 92, 1, pp. 9-12 (2008)

[10] B. Ortaç, C. Lecaplain, A. Hideur, T. Schreiber, J. Limpert, and A. Tünnermann, “Passively mode-locked single-polarization microstructure fiber laser,” Opt. Express 16, 2122-2128 (2008)

[9] T. Schreiber, D. Schimpf, D. Müller, F. Röser, J. Limpert, and A. Tünnermann, “Influence of pulse shape in self-phase-modulation-limited chirped pulse fiber amplifier systems,” J. Opt. Soc. Am. B 24, 1809-1814 (2007)

[8] T. Schreiber, B. Ortaç, J. Limpert, and A. Tünnermann, “On the study of pulse evolution in ultra-short pulse mode-locked fiber lasers by numerical simulations,” Opt. Express 15, 8252-8262 (2007)

[7] C. Aguergaray, T. V. Andersen, D. N. Schimpf, O. Schmidt, J. Rothhardt, T. Schreiber, J. Limpert, E. Cormier, and A. Tünnermann, “Parametric amplification and compression to ultrashort pulse duration of resonant linear waves,” Opt. Express 15, 5699-5710 (2007)

[6] B. Ortac, M. Plötner, T. Schreiber, J. Limpert, and A. Tünnermann, “Experimental and numerical study of pulse dynamics in positive net-cavity dispersion modelocked Yb-doped fiber lasers,” Opt. Express 15, 15595-15602 (2007)

[5] T. V. Andersen, O. Schmidt, C. Bruchmann, J. Limpert, C. Aguergaray, E. Cormier, and A. Tünnermann, “High repetition rate tunable femtosecond pulses and broadband amplification from fiber laser pumped parametric amplifier,” Opt. Express 14, 4765-4773 (2006)

[4] Thomas Schreiber, Carsten K. Nielsen, Bülend Ortac, Jens Limpert, and Andreas Tünnermann, “Microjoule-level all-polarization-maintaining femtosecond fiber source,” Opt. Lett. 31, 574-576 (2006)

[3] T. Schreiber, T. V. Andersen, D. Schimpf, J. Limpert, and A. Tünnermann, “Supercontinuum generation by femtosecond single and dual wavelength pumping in photonic crystal fibers with two zero dispersion wavelengths,” Opt. Express 13, 9556-9569 (2005)

[2] J. Limpert, C. Aguergaray, S. Montant, I. Manek-Hönninger, S. Petit, D. Descamps, E. Cormier, and F. Salin, “Ultra-broad bandwidth parametric amplification at degeneracy,” Opt. Express 13, 7386-7392 (2005)

[1] T. Schreiber, J. Limpert, H. Zellmer, A. Tünnermann, K.P. Hansen, “High average power supercontinuum generation in photonic crystal fibers,” Optics Communications, Volume 228, Issues 1–3, 2003, Pages 71-78,

[0] J. Limpert, T. Schreiber, T. Clausnitzer, K. Zöllner, H.-J. Fuchs, E.-B. Kley, H. Zellmer, and A. Tünnermann, “High-power femtosecond Yb-doped fiber amplifier,” Opt. Express 10, 628-638 (2002).

기술 지원

소프트웨어를 사용하는 데 문제가 있는 경우 언제든지 도움을 드릴 수 있다고 알려주십시오.또한 FAQ 섹션에서 필요한 정보와 기술적 문제가 있는지 확인하십시오.

온라인 강좌 신청

온라인 강좌에 가입할 수 있습니다.참여 인원수와 좋아하는 내용을 명기하세요.우리는 돌아와서 당신에게 가격을 제시할 것입니다.

자주 묻는 질문(FAQ)

线性和非线性脉冲传输软件Fiberdesk

질문 1:

Fiberdesk 소프트웨어를 나노초 펄스 또는 연속 광선에 사용할 수 있습니까?

원칙적으로 비선형 Schrüdinger 방정식은 긴 펄스의 전송을 허용합니다.그러나 Brillioun 산란은 구현되지 않았습니다.라만 산란을 시뮬레이션할 수 있습니다.연속광의 경우 피크와 평균 전력이 동일하도록 시간 크기에 따라 반복율을 설정해야 합니다.FiberdeskV5.0부터 시간 창까지 반복 비율을 자동으로 조정하는 "펄스 생성" 대화 상자 기능을 제공합니다.

또한 스펙트럼 대역폭은 시간 해상도 (데이터 포인트 수의 시간 창) 에 의해 제공됩니다.예를 들어, 최대 데이터 포인트의 경우 ~ 의 대역폭을 처리할 수 있습니다.100nm@1μm 중심파장의 80ns 펄스는 매우 느리다는 단점이 있다.또한 ns와 cw 라이트는 비선형 설정론 방정식이 없는 상황에서 Fiberdesk 소프트웨어가 제공하는 속도 방정식으로 시뮬레이션할 수 있습니다.

线性和非线性脉冲传输软件Fiberdesk

질문 2:

USB 보호로 인해 소프트웨어가 부팅되지 않거나 오류가 발생하면 어떻게 합니까?

2020 년 이후의 USB 암호화 개는 드라이버를 설치할 필요가 없으며 자동으로 MS Windows와 함께 제공됩니다.

그러나 다음 FAQ에 필요한 정보 페이지에 액세스하는 등 USB 암호화 개 드라이버를 설치해야 하는 경우 다음 단계를 수행합니다.

0. USB를 제거하고 관리자 권한으로 컴퓨터를 시작합니다.

1. Sentinel HASP/LDK 다운로드 – 명령줄 런타임 설치 프로그램

2. 명령줄에서 압축을 풀고 파일이 포함된 haspdinst.exe를 시작하여 이전 드라이버를 완전히 제거하십시오.

haspdinst -purge

3. 다시 명령줄에서 새 드라이버 설치

haspdinst - 설치

4. USB를 삽입하고 fiberdesk 시작

문제가 계속되면 연락 주십시오.

线性和非线性脉冲传输软件Fiberdesk

질문 3:

오류 메시지가 계속 수신됩니까?

웹 브라우저에서 http://localhost:1947을 사용하고 키의 스크린샷이나 기능 번호를 보내주십시오.

线性和非线性脉冲传输软件Fiberdesk

질문 4:

USB 암호화 개가 작동하더라도 Fiberdesk는 작동하지 않습니다.뭘 더 할 수 있겠어?

먼저 폴더를 확인합니다.

C:/Users/%USER%/AppData/Roaming/fiberdesk

"_fiberdesk_0.log" 파일을 보내 주십시오.또한 명령줄에서 Fiberdesk를 시작합니다(Windows 키를 누른 다음 "cmd"+ Enter를 입력하고 Fiberdesk 폴더로 전환하여 Fiberdesk를 시작).그런 다음 명령줄에서 출력된 스크린샷을 지원에 보내려면 그림의 예를 참조하십시오.